PMID- 28075033
OWN - NLM
STAT- PubMed-not-MEDLINE
DCOM- 20180718
LR  - 20201001
IS  - 1521-4095 (Electronic)
IS  - 0935-9648 (Linking)
VI  - 29
IP  - 10
DP  - 2017 Mar
TI  - 3D Printing of Transparent and Conductive Heterogeneous Hydrogel-Elastomer 
      Systems.
LID - 10.1002/adma.201604827 [doi]
AB  - A hydrogel-dielectric-elastomer system, polyacrylamide and poly(dimethylsiloxane) 
      (PDMS), is adapted for extrusion printing for integrated device fabrication. A 
      lithium-chloride-containing hydrogel printing ink is developed and printed onto 
      treated PDMS with no visible signs of delamination and geometrically scaling 
      resistance under moderate uniaxial tension and fatigue. A variety of designs are 
      demonstrated, including a resistive strain gauge and an ionic cable.
CI  - (c) 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
FAU - Tian, Kevin
AU  - Tian K
AD  - School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 
      02138, USA.
FAU - Bae, Jinhye
AU  - Bae J
AD  - School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 
      02138, USA.
FAU - Bakarich, Shannon E
AU  - Bakarich SE
AD  - School of Mechanical Materials and Mechatronic Engineering, University of 
      Wollongong, Wollongong, NSW, 2522, Australia.
AD  - Intelligent Polymer Research Institute, ARC Centre of Excellence for 
      Electromaterials Science, AIIM Facility, University of Wollongong, Wollongong, 
      NSW, 2522, Australia.
FAU - Yang, Canhui
AU  - Yang C
AD  - School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 
      02138, USA.
AD  - State Key Laboratory for Strength and Vibration of Mechanical Structures, 
      International Center for Applied Mechanics, School of Aerospace, Xi'an Jiaotong 
      University, Xi'an, 710049, China.
FAU - Gately, Reece D
AU  - Gately RD
AD  - Intelligent Polymer Research Institute, ARC Centre of Excellence for 
      Electromaterials Science, AIIM Facility, University of Wollongong, Wollongong, 
      NSW, 2522, Australia.
AD  - Soft Materials Group, School of Chemistry, University of Wollongong, Wollongong, 
      NSW, 2522, Australia.
FAU - Spinks, Geoffrey M
AU  - Spinks GM
AD  - School of Mechanical Materials and Mechatronic Engineering, University of 
      Wollongong, Wollongong, NSW, 2522, Australia.
AD  - Intelligent Polymer Research Institute, ARC Centre of Excellence for 
      Electromaterials Science, AIIM Facility, University of Wollongong, Wollongong, 
      NSW, 2522, Australia.
FAU - In Het Panhuis, Marc
AU  - In Het Panhuis M
AD  - Intelligent Polymer Research Institute, ARC Centre of Excellence for 
      Electromaterials Science, AIIM Facility, University of Wollongong, Wollongong, 
      NSW, 2522, Australia.
AD  - Soft Materials Group, School of Chemistry, University of Wollongong, Wollongong, 
      NSW, 2522, Australia.
FAU - Suo, Zhigang
AU  - Suo Z
AD  - School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 
      02138, USA.
AD  - Kavli Institute for Bionano Science and Technology, Harvard University, 
      Cambridge, MA, 02138, United States.
FAU - Vlassak, Joost J
AU  - Vlassak JJ
AD  - School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 
      02138, USA.
LA  - eng
PT  - Journal Article
DEP - 20170111
PL  - Germany
TA  - Adv Mater
JT  - Advanced materials (Deerfield Beach, Fla.)
JID - 9885358
OTO - NOTNLM
OT  - 3D printing
OT  - elastomers
OT  - hydrogels
OT  - ionic conductors
OT  - stretchable electronics
EDAT- 2017/01/12 06:00
MHDA- 2017/01/12 06:01
CRDT- 2017/01/12 06:00
PHST- 2016/09/07 00:00 [received]
PHST- 2016/11/05 00:00 [revised]
PHST- 2017/01/12 06:00 [pubmed]
PHST- 2017/01/12 06:01 [medline]
PHST- 2017/01/12 06:00 [entrez]
AID - 10.1002/adma.201604827 [doi]
PST - ppublish
SO  - Adv Mater. 2017 Mar;29(10). doi: 10.1002/adma.201604827. Epub 2017 Jan 11.