PMID- 30961286
OWN - NLM
STAT- PubMed-not-MEDLINE
LR  - 20231006
IS  - 2073-4360 (Electronic)
IS  - 2073-4360 (Linking)
VI  - 10
IP  - 12
DP  - 2018 Dec 8
TI  - The High Density Polyethylene Composite with Recycled Radiation Cross-Linked 
      Filler of rHDPEx.
LID - 10.3390/polym10121361 [doi]
LID - 1361
AB  - This article discusses the possibilities of using radiation cross-linked high 
      density polyethylene (HDPEx) acting as a filler in the original high density 
      polyethylene (HDPE) matrix. The newly created composite is one of the possible 
      answers to questions relating to the processing of radiation cross-linked 
      thermoplastics. Radiation cross-linked networking is-nowadays, a commonly used 
      technology that can significantly modify the properties of many types of 
      thermoplastics. This paper describes the influence of the concentration of 
      filler, in the form of grit or powder obtained by the grinding/milling of 
      products/industrial waste from radiation cross-linked high density polyethylene 
      (rHDPEx) on the mechanical and processing properties and the composite structure. 
      It was determined that, by varying the concentration of the filler, it is 
      possible to influence the mechanical behaviour of the composite. The mechanical 
      properties of the new composite-measured at room temperature, are generally 
      comparable or better than the same properties of the original thermoplastic. This 
      creates very good assumptions for the effective and economically acceptable, 
      processing of high density polyethylene (rHDPEx) waste. Its processability 
      however, is limited; it can be processed by injection moulding up to 60 wt %.
FAU - Manas, David
AU  - Manas D
AD  - Faculty of Applied Informatics, Tomas Bata University in Zlin, CEBIA-Tech, Nad 
      Stranemi 4511, 760 05 Zlin, Czech Republic. manas@utb.cz.
FAU - Manas, Miroslav
AU  - Manas M
AD  - Faculty of Applied Informatics, Tomas Bata University in Zlin, CEBIA-Tech, Nad 
      Stranemi 4511, 760 05 Zlin, Czech Republic. manas@fai.utb.cz.
FAU - Mizera, Ales
AU  - Mizera A
AUID- ORCID: 0000-0001-9681-1008
AD  - Faculty of Applied Informatics, Tomas Bata University in Zlin, CEBIA-Tech, Nad 
      Stranemi 4511, 760 05 Zlin, Czech Republic. mizera@utb.cz.
FAU - Stoklasek, Pavel
AU  - Stoklasek P
AD  - Faculty of Applied Informatics, Tomas Bata University in Zlin, CEBIA-Tech, Nad 
      Stranemi 4511, 760 05 Zlin, Czech Republic. pstoklasek@utb.cz.
FAU - Navratil, Jan
AU  - Navratil J
AD  - SKODA AUTO a.s., tr. Vaclava Klementa 869, Mlada Boleslav II, 293 01 Mlada 
      Boleslav, Czech Republic. jan.navratil@skoda-auto.cz.
FAU - Sehnalek, Stanislav
AU  - Sehnalek S
AD  - Faculty of Applied Informatics, Tomas Bata University in Zlin, CEBIA-Tech, Nad 
      Stranemi 4511, 760 05 Zlin, Czech Republic. sehnalek@fai.utb.cz.
FAU - Drabek, Pavel
AU  - Drabek P
AD  - Faculty of Applied Informatics, Tomas Bata University in Zlin, CEBIA-Tech, Nad 
      Stranemi 4511, 760 05 Zlin, Czech Republic. pdrabek@utb.cz.
LA  - eng
PT  - Journal Article
DEP - 20181208
PL  - Switzerland
TA  - Polymers (Basel)
JT  - Polymers
JID - 101545357
PMC - PMC6401827
OTO - NOTNLM
OT  - High Density Polyethylene
OT  - mechanical properties
OT  - processability
OT  - radiation cross-linking
OT  - structure
COIS- The authors declare no conflict of interest.
EDAT- 2019/04/10 06:00
MHDA- 2019/04/10 06:01
PMCR- 2018/12/08
CRDT- 2019/04/10 06:00
PHST- 2018/10/25 00:00 [received]
PHST- 2018/11/30 00:00 [revised]
PHST- 2018/12/05 00:00 [accepted]
PHST- 2019/04/10 06:00 [entrez]
PHST- 2019/04/10 06:00 [pubmed]
PHST- 2019/04/10 06:01 [medline]
PHST- 2018/12/08 00:00 [pmc-release]
AID - polym10121361 [pii]
AID - polymers-10-01361 [pii]
AID - 10.3390/polym10121361 [doi]
PST - epublish
SO  - Polymers (Basel). 2018 Dec 8;10(12):1361. doi: 10.3390/polym10121361.