PMID- 36530333
OWN - NLM
STAT- PubMed-not-MEDLINE
LR  - 20221221
IS  - 2470-1343 (Electronic)
IS  - 2470-1343 (Linking)
VI  - 7
IP  - 49
DP  - 2022 Dec 13
TI  - Research on Microstructure and Mechanical Properties of Nylon6/Basalt 
      Fiber/High-Density Polyethylene Composites.
PG  - 44972-44983
LID - 10.1021/acsomega.2c05280 [doi]
AB  - As a representative polyolefin, high-density polyethylene (HDPE) has become one 
      of the most commonly used commercial plastics with a wide range of applications 
      in the world. However, its applications are limited due to poor mechanical 
      properties. Hence, it is indispensable to develop composites with improved 
      mechanical properties to overcome this disadvantage. In our work, basalt fiber 
      (BF) and polyamide 6 (PA6)-reinforced HDPE composites were prepared. The effects 
      of adding fiber, organic filler, and polar component maleic anhydride (MAH) on 
      the microstructural characteristics of composites were investigated. 
      Microstructural characterization evidenced that the binary-dispersed phase 
      (PA6/BF) possesses a core-shell structure in which the component PA6 encapsulates 
      the component BF, and the extent of encapsulation declines with the increase of 
      MAH addition. It has been confirmed by scanning electron microscopy (SEM) 
      observation that the microstructure is related to the interfacial tension of 
      components. The effects of multicomponents on the crystallization behavior of 
      composites were studied. The differential scanning calorimeter (DSC) analysis 
      exhibited a significant change in the HDPE microstructure. Results showed that, 
      as nucleating agents, PA6 and BF improve the crystallization rate in the cooling 
      process. Furthermore, the rheological behavior of multicomponent composites was 
      studied. With the increase of MAH, a clear improvement of complex viscosity and 
      storage modulus was observed, of which the mechanism has been discussed in 
      detail. The relationship between microstructure and heat resistance of composites 
      was studied by a thermal deformation test under static fore. It is confirmed that 
      the thermally conductive fiber BF and other components can form a thermally 
      conductive network and channels, thus improving the heat resistance. It can 
      become a composite material, which is suitable for special environments.
CI  - (c) 2022 The Authors. Published by American Chemical Society.
FAU - Zhou, Xilai
AU  - Zhou X
AD  - School of Automotive and Transportation Engineering, Heilongjiang Institute of 
      Technology, Harbin150050, Heilongjiang, China.
AD  - College of Material Science and Engineering, Qiqihar University, Qiqihar161006, 
      Heilongjiang, China.
AD  - Heilongjiang Provincial Key Laboratory of Polymeric Composite Materials, 
      Qiqihar161006, China.
FAU - Wang, Yazhen
AU  - Wang Y
AUID- ORCID: 0000-0001-9314-5222
AD  - College of Material Science and Engineering, Qiqihar University, Qiqihar161006, 
      Heilongjiang, China.
AD  - Heilongjiang Provincial Key Laboratory of Polymeric Composite Materials, 
      Qiqihar161006, China.
AD  - College of Chemistry, Chemical Engineering and Resource Utilization, Northeast 
      Forestry University, Harbin150040, Heilongjiang, China.
FAU - Chen, Sijia
AU  - Chen S
AD  - PetroChina Petrochemical Research Institute, Daqing Chemical Engineering Research 
      Center, Daqing163714, China.
FAU - Wang, Chenglong
AU  - Wang C
AD  - PetroChina Petrochemical Research Institute, Daqing Chemical Engineering Research 
      Center, Daqing163714, China.
FAU - Dong, Shaobo
AU  - Dong S
AUID- ORCID: 0000-0002-9443-3469
AD  - College of Material Science and Engineering, Qiqihar University, Qiqihar161006, 
      Heilongjiang, China.
FAU - Lan, Tianyu
AU  - Lan T
AUID- ORCID: 0000-0001-7252-4848
AD  - College of Material Science and Engineering, Qiqihar University, Qiqihar161006, 
      Heilongjiang, China.
FAU - Zu, Liwu
AU  - Zu L
AD  - College of Material Science and Engineering, Qiqihar University, Qiqihar161006, 
      Heilongjiang, China.
FAU - Song, Xinyi
AU  - Song X
AD  - Department of Biomedical Laboratory Science, Dankook University, Cheonan31116, 
      Korea.
FAU - Kong, Yue
AU  - Kong Y
AUID- ORCID: 0000-0003-2495-2607
AD  - Liaoning Key Laboratory of Lignocellulose Chemistry and BioMaterials, Liaoning 
      Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light 
      Industry and Chemical Engineering, Dalian Polytechnic University, Dalian116034, 
      China.
LA  - eng
PT  - Journal Article
DEP - 20221129
PL  - United States
TA  - ACS Omega
JT  - ACS omega
JID - 101691658
PMC - PMC9753198
COIS- The authors declare no competing financial interest.
EDAT- 2022/12/20 06:00
MHDA- 2022/12/20 06:01
PMCR- 2022/11/29
CRDT- 2022/12/19 03:26
PHST- 2022/08/17 00:00 [received]
PHST- 2022/11/15 00:00 [accepted]
PHST- 2022/12/19 03:26 [entrez]
PHST- 2022/12/20 06:00 [pubmed]
PHST- 2022/12/20 06:01 [medline]
PHST- 2022/11/29 00:00 [pmc-release]
AID - 10.1021/acsomega.2c05280 [doi]
PST - epublish
SO  - ACS Omega. 2022 Nov 29;7(49):44972-44983. doi: 10.1021/acsomega.2c05280. 
      eCollection 2022 Dec 13.